APH 85/95
Hydrostatisk
Weights & Dimensions
Machine weight basic unit 760 kg
A Base plate length 520 mm
B Machine length 1070 mm
C with handle 1965 mm
D Machine heigth 910 mm
E Handle height (work) 1000 mm
F Handle height (transport) 1500 mm
G Machine width 650/800/950 mm
Engine
Engine Kubota D902
Fuel Diesel
Engine Output 13.4 kW
at RPM 2600 rpm
Fuel consumption 3.3 l/h
Compaction Forces
Max. Vibration frequency 52 Hz
Max. Centrifugal force 85 kN
Working surface basic unit 24.8 m²/min
Max Surface Pressure 20.4 N/cm²
Miscellaneous
Operating Speed 31 m/min
Tank capacity 10 l
Gradeability 36%
Max. incline to all sides 30°
Options
Extension Plates 75 mm / 150 mm
Operation hour meter x
Electric starter x
Emergency stop x
ACE econ x
ACE force x
Working lights –
APH 85/95 Petrol
Weights & Dimensions
Machine weight basic unit 740 kg
A Base plate length 520 mm
B Machine length 1070 mm
C with handle 1965 mm
D Machine heigth 910 mm
E Handle height (work) 1000 mm
F Handle height (transport) 1500 mm
G Machine width 650/800/950 mm
Engine
Engine Briggs & Stratton V-Twin 5434
Fuel Petrol
Engine Output 17.8 kW
at RPM 2600 rpm
Fuel consumption 3.5 l/h
Compaction Forces
Max. Vibration frequency 52 Hz
Max. Centrifugal force 85 kN
Working surface basic unit 24.8 m²/min
Max Surface Pressure 20.4 N/cm²
Miscellaneous
Operating Speed 29.5 m/min
Tank capacity 10 l
Gradeability 36%
Max. incline to all sides 30°
Options
Extension Plates 75 mm / 150 mm
Operation hour meter x
Electric starter x
Emergency stop x
ACE econ x
ACE force x
Working lights –
Ammann is the technological leader in plate compaction with its patented triple-shaft exciter system. The system keeps plate movement consistent, which in turn enables smooth travel – even through heavy, cohesive soils – and helps effortlessly overcome steep grades. APH machines are impressive climbers and can even do so while backfilling saturated areas – work that can leave competitive products at a standstill.
The standard hand guide for APH plates is isolated to minimise hand-arm vibration. Levels lower than 2.5 m/s² (excluding APH 100-20) enable operators to work longer shifts with the best comfort. The vibration levels are so low that safety codes do not require documentation of operator hours.
Ammann Orbitrol steering controls the adjustment of the centrifugal weights, allowing a smooth and easy change of direction while ensuring great accuracy on the jobsite. Machine speed and direction can be adjusted by a simple turn of the steering control lever. The machine also can hover and provide on-the-spot compaction for the more challenging areas. This system also helps improve productivity in corners and other tight spots.
A fully hydrostatic drive system eliminates the need for a V belt and a centrifugal clutch – and the maintenance that go with them. A hydraulic motor drives the eccentric shafts.
APH Hydrostatic Vibratory Plates can be equipped with the industry-proven Ammann Compaction Expert (ACE), an automated compaction measurement and control system. The ACE system on the vibratory plates utilises the same technology that has been used on Ammann’s heavy compaction machines for years. It provides operators with an accurate indication of soil stiffness and whether desired compaction has been achieved.
..........
DIESEL / BENSIN
Vikt: 760 kg | 740 kg
Max. vibration frekvens: 52 Hz
Max. centrifugalkraft: 85 kN