ARR 1575
Dimensions Metric US
A = Machine Length 1980 mm 78 in
B = Wheelbase 1000 mm 39.4 in
C= Machine Height 1317 mm 51.9 in
D = Machine Height (hood) 1282 mm 50.5 in
E = Machine Width 601 mm 23.7 in
F = Drum Width 640 / 850 mm 25.2 / 33.46 in
G = Machine Length 2227 mm 87.7 in
I = Drum Diameter 525 mm 20.7 in
Miscellaneous
Fuel tank capacity 28 l 7.4 gal
Hydraulic oil Capacity 16 l 4.2 gal
Weight & Driving characteristic
640 mm 25.2 in
Operating weight 1340 kg 2950 Ib
Oscilation Angle ± 7° ± 7°
Working speed 1.4 km/h 0.9 MPH
Travel speed 2.8 km/h 1.7 MPH
Climbing ability 30 % 30 %
Turning radius Inner 1540 mm 60.6 in
Turning radius outer 2190 mm 86.2 in
850 mm 33.46 in
Operating weight 1450 kg 3200 Ib
Oscilation Angle ± 7° ± 7°
Working speed 1.4 km/h 0.9 MPH
Travel speed 2.8 km/h 1.7 MPH
Climbing ability 30 % 30 %
Turning radius Inner 1440 mm 56.7 in
Turning radius outer 2290 mm 90.2 in
Compaction Forces
Frequency 40 Hz 2400 VPM
Amplitude 1.1 / 0.6 mm 0.043 / 0.024 in
Centrifugal force 75 / 36 kN 75 / 36 kN
Engine
Manufacturer Yanmar 3TNV80F Yanmar 3TNV80F
Power Acc. ISO 3046-1 14.6 kW 20 HP
ENGINE COMPLIES WITH EMISSION REGULATIONS U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final
Maximum torque 68.4/1800 Nm(ft Ib)/rpm 68.4/1800 Nm(ft Ib)/rpm
No of Cylinders 3 / water cooling 3 / water cooling
Drive system Hydrostatic Hydrostatic
High compaction output
Faster compaction of thicker layers in fewer passes
Articulated joint with oscillation
Higher stability and increased surface coverage and quality
Drum extensions
Adapt machine width to jobsite needs
Simple remote control
Intuitive machine control at a safe distance, even with unskilled operator
Infra-red remote control
Highly safe; operator must have direct visibility of the machine to operate
Solar power cells on remote control
Machine is always ready to work without additional remote control charging
Maintenance-friendly design
Easy and fast daily maintenance
Accessible service and maintenance points
Machine serviced from ground, enabling comfort
Maintenance-free parts
Reduced risk of machine damage
----------------------
Frekvens: 40 Hz
Trumbredd: 640/850 mm
Centrifugalkraft: 75/36 kN
Vikt: 1340/1450 kg